Free Shipping

Overview and Specifications:


  • This X860 M.2 NGFF SATA SSD Shield provides a complete storage solution for raspberry pi, it Supports up to 2TB m.2 NGFF SSD solid-state drive.


  • Only support M.2 NGFF 2280/2260/2242/2230 SSD hard drive!


  • Ideal storage solution for Raspberry Pi -M.2 NGFF SATA SSD Shield
  • Supports up to 2TB m.2 NGFF SSD solid-state drive
  • Supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230
  • Supports operating system installation and booting from your SSD
  • Supports faster OS image writing ( gt,300Mb/S*) from a PC or a Mac
  • Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
  • USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
  • Quick file transfer with high-speed USB3.0 5Gb/s connectivity from a PC or a Mac
  • USB bus-powered
  • LED blue indicator indicates drive status
  • Specially-made USB3.0 connector to connect with Raspberry Pi – no additional cables needed
  • On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 6.6Watts)
  • Fully compatible with X720,X730 and X735 for intelligent and safe power management
  • PCB Size: 87mm x 56mm


  • USB3.1 Gen 1 port, SSD sequential write speed gt,300MB/s
  • NGFF SATA SSD is not included
  • Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
  • As with all SSDs, new media must be formatted before use
  • Performance depends on host system, workload, and SSD media used
  • SSDs use exceptionally high performance storage media that will run hot when under load
  • Older SSD drives with less efficient flash media may not perform as well as newer drives

Power supply request

  • 5Vdc +/-5% , Powered by Raspberry Pi
  • Additional power supply for SSD (Only when you find that the power supply of the SSD is insufficient)
  • 5Vdc via on-board micro-USB or XH2.5 2Pin connector

Matching Metal Case

  • Please refer to X850/X850 V4.0 metal case
  • Ports amp, Connectors
  • USB socket – USB 3.0 type A x 1
  • Micro-USB SSD power socket x 1
  • XH2.54 SSD power input port x 1
  • 67Pin M.2 connector P=0.5 mm, H3.2 mm, Key B x 1

Leave a Comment