Free Shipping

Overview and Specifications:

There is a triple-axis MEMS gyroscope and a triple-axis MEMS accelerometer built in the MPU6050.
You can solder it onto experiment PCB or your own design PCB easily  with the help of the SMD pins.
– Compatibility: Because the logic level is 3.3V 5V compatible, it is compatible with Arduino board(Arduino UNO R3 / Arduino Nano / Arduino Mega2560 / Arduino Leonardo) or other 5V or 3.3V MCU.
– Module type: 3-Axis Accelerometer + 3-Axis Gyro
– Digital-output triple-axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
– Digital-output X-, Y-, and Z-Axis angular rate sensors (gyroscopes) with a user-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec
– Interface: I2C
– I2C address: 0x68(default) can change to be 0x69 by solder the resistor onboard.
– Operating voltage: 3.2 – 5.5V
– Logic level: 5V or 3.3V (onboard 3.3V level converter circuit)
– Ultra Low Power: about 6mA in measurement mode, 0.2mA in [email protected] 3.3V
– IO Port Package: Both SMD and PAD are available, and the pin pitch is 2.54mm.
– Application: HDD shock protection, Vibration sensor, Game controller input, Robotics, Smart vehicles

Leave a Comment