Free Shipping

Overview and Specifications:


– NVMe Transmission: follow the trend
Improve reading and writing performance, reduce lag brought by ACHI and satisfy the needs of no lag and fast reading and writing.
– Brand-new Port amp, Bigger Capacity
Allows for excellent reading and writing speed with PCIe Gen3*4 and up to 8Gbps bandwidth transmission.
– Slim Body amp, Stable Transmission
Compatible with PC and laptop with M.2 2280 body. Low power consumption, low heat dissipation, zero noise, anti-crash and anti-shock.
– Applied for multiple scenarios and improve life efficiency.
– Up to 4 Lane amp, LDPC ECC
Designed for high performance platform with NVMe Gen3*4, up to 4 Lane and LDPC ECC.
– Wide Applications
N930E Pro corresponds with large software and solve the problem of lag and low speed.
Form Factor: M.2 2280
Capacity: 128GB/256GB/512GB(optional)
Interface: PCIe Gen3(8Gb/s)*4,Up to 4 Lane
Host Memory Buffer: Support
Features: LDPC/S.M.A.R.T/Wear-Leveling
Item size: 8 * 2.2 * 0.2cm / 3.15 * 0.87 * 0.08in(L * W * H)
Item weight: Approx. 7g / 0.25oz
Package size: 15.3 * 6.6 * 1.5cm / 6.02 * 2.6 * 0.59in(L * W * H)
Package weight: Approx. 37g / 1.31oz
Use Suggestions
Tips One:
The memory capacity of the memory product is usually calculated according to 1MB=1000KB, 1GB=1000MB, and the operating system adopts binary algorithm: 1MB=1024KB, 1GB=1024MB, so there is a certain difference between the display capacity and the nominal capacity of the product.
Tip Two:
Usually, the FAT32 disk system used by the system supports a single file with a maximum capacity of 4 GB. If you need to store a file with more than 4 GB of single files such as HD video, it is recommended that you reformat it to NTFS or exFAT file system. The steps are as follows:
1. Connect the flash memory product to the computer
2. Right click on the flash partition to select format
3. Select NTFS or exFAT format in the file system
4. Click Start and Finish.
Tips Three:
1.M.2 interface SSD mainly uses B Key (Socket 2) and M Key (Socket 3)
2.B Key mainly supports SATA bus and PCIeX2 bus
3.M Key mainly supports PCIeX4 bus
4.B+M Key is mainly used for some mainboards that are compatible with SATA and PCIE buses.
5.B Key and M Key inetrfaces cannot be used in compatibility. So before purchasing, please confirm the M.2 inferface specification of your device to avoid damage or SSD burning.

Leave a Comment