Overview and Specifications:
Voltage: DC 5V
Rated Power: 8W
Noise: Less than 75dB
Lithium battery capacity: 2000mAh
USB cable length: Approx. 83cm / 32.7in
Mode: Wireless, wired(Optional)
Item size: 20.9 * 13.7 * 6cm / 8.2 * 5.4 * 2.4in(L * W * H)
Item weight: Approx. 218g / 7.7oz
Package size: 18 * 16.5 * 6.5cm / 7.1 * 6.5 * 2.6in(L * W * H)
Package weight: 307g / 10.8oz
1. Turn off the power before installing or taking out the sponge filter.
2. The sponge filter should be cleaned at least once a month, pls clean it in time when there is too much garbage.
3. Make sure the sponge filter be installed before the vacuum cleaner in operation.
4. Check if the sponge filter is installed well or broken before using it again.
5. Avoid being exposed to the rain, being close to heat source and direct-sun exposure.
6. Avoid touching any kind of liquid.
7. Avoid absorbing sharp & heat objects, such as glass and charcoal fire.
8. Avoid non-professional person to repair or modify inner circuit.
Step 1: Twist off the dust collecting cylinder.
Step 2: Pour out the garbage from it and take out the sponge filter.
Step 3: Rinse the sponge filter with water and dry it in the air.
Step 4: Replace the clean sponge filter and screw down the dust collecting cylinder.
Clearing of Fault:
1. When there is unusual sound during operation, it may suck abnormal objects due to no installation of the sponge filter.
Turn off power immediately, take out abnormal objects and install the sponge filter.
2. If the suction is getting weak, pls check whether the nozzle and sponge filter are blocked or not.
3. When the vacuum cleaner is unable to run, pls check if the button be pressed or it is power off.
1 * Mimi USB Vacuum Keyboard Cleaner(Wireless Mode)
1 * Brush Nozzle with Long Hair
1 * Flat Suction Nozzle
1 * Replacement Sponge Filter
1 * USB Cable
1 * User Manual
Unit Type: piece
Package Weight: 0.322kg (0.71lb.)
Package Size: 18cm x 17cm x 7cm (7.09in x 6.69in x 2.76in)