Price:
US$18.22

Free Shipping


Overview and Specifications:

◆ LED time display
◆ 12/24 hour system
◆ Alarm clock amp, snooze
◆ Temperature display °C or °F
◆ Temperature range: 0°C ~ 50°C
◆ Night mode setting (18:00-06:00)
◆ Mirror
◆ Time temperature switching
◆ 3-speed lamp brightness adjustment
◆ 4 function buttons (SET, UP, DOWN, RGB)
◆ Time memory function (1XCR2032 battery is used for time memory function)
◆Drive mode: Host 1 CR2032 battery + transmitter 1 CR2032 battery (not included) USB cable (included)
Driven by battery, or powered by USB cable, the LED is bright and there is BI sound.
Driven with a USB cable, the LED display is always on.

Product size: 30.5*3*30.5cm
Product packaging size: 34.5*4.5*35cm
Net weight: 0.35kg
Total weight: 0.71kg

1. Function button

a. Press the SET button to switch: Time – gt, Temperature – gt, Alarm – gt, Night mode ON/OFF

b. Press the UP button to switch the 3 lamp brightness adjustment

c. In time mode, press DOWN to turn the alarm function on/off.

e. Press the finger button to select any of the RGB lights (red, orange, green, blue, sky blue, purple, white, switch 7 lights, turn off the RGB lights). RGB lights can only be used with USB cable drivers.

2. operating

1) Time setting

1 In time mode, press and hold SET to set the time, the order is 12 hours / 24 hours – gt, hours – gt, points

2 The setting item will flash during the setting process

3 Press the UP button once to add 1 and press the UP button long to increase the speed by 8 steps.

4 Press the DOWN button to decrease 1, press and hold the DOWN button, and decrease by 8 steps.

5 If the 12-hour system is selected, the PM display indicates the afternoon time. No display means AM time (AM time does not reflect AM)

6 Press SET or no operation for 10 seconds to confirm the setting and return to normal mode.

2) Alarm setting

1 In time mode, press SET three times to enter the time setting mode. Press and hold SET, AL icon and hour flash, enter alarm time setting, the order is hour – gt, minute – gt, snooze time (5 points to 60 points)

2 Press the UP button once to add 1 and press the UP button long to increase the speed by 8 steps.

3 Press the DOWN button to decrease by 1, long press the DOWN button, and decrease by 8 steps.

4 The AL icon will flash during the setup process.

5 Press SET or no operation for 10 seconds to confirm the setting and return to normal mode.

6 When the alarm sounds, press any button to stop the alarm

3) When the alarm occurs

1 BIBIBIBI alarm 2 minutes

2 Press SET to stop the alarm and turn on the snooze function. The AL icon flashes until the next alarm time.

3 Press UP and DOWN to turn off the alarm. If the AL icon stops flashing, turn off the alarm time.

4 When the alarm occurs, the RGB lights will flash together.

4) Snooze

1 default snooze time is 5 minutes

2 In the alarm mode, press and hold SET to enter the alarm setting, press SET three times to enter the snooze time setting. 05 flashes, press UP or DOWN to set the snooze time from 5 minutes to 60 minutes.

3 Press the UP button once to add 1 and press the UP button long to increase the speed by 8 steps.

4 Press the DOWN button to decrease 1, press and hold the DOWN button, and decrease by 8 steps.

5 When the alarm is activated, press SET to stop the alarm and turn on snooze. AL flashes until the next alarm time expires.

6 When using battery power, press any button and the LED will light for 5 seconds.

5) Night mode

1 Night mode: LED lights will automatically dim at night time

2 In the time interface, press the SET button 4 times to enter the night mode. Press the UP or DOWN button to switch the night mode. ON means to turn on night mode, and OFF means to turn off night mode.

3 The default night mode time is 18:00-6:00

4 When the night mode is ON, press and hold SET to enter the night mode setting. The setting sequence is: night time start hour – gt, night time start minute – gt, night time end hour – gt, night time end minute. When setting night time start time, mirror The upper circle is lit, and when the night time end time is set, the lower circle of the mirror is lit.

6) Brightness adjustment

3 brightness adjustment, default bright, press UP to switch the brightness

7) Temperature display

1 In time mode, press SET to display the temperature. Press UP to switch the temperature °C/°F

2 In temperature mode, press and hold SET until BI sounds. LED switching display: temperature (5 seconds) – gt, time (10 seconds)

Press and hold SET to hear the BI sound again and return to the time interface.

Leave a Comment