Price:
US$10.70

Free Shipping


Overview and Specifications:

1. LED time display.
2. 12/24 hour format is optional.
3. Alarm clock and snooze.
4. The temperature can be switched in °C or °F.
5. Mirror function.
6. Time and temperature switch display.
7. 3 block brightness level.
8. 4 function keys (mode, up, down, touch keys).
9. Time memory function (3XAAA battery for time memory)

specification:
Temperature range: 0 ° C ~ 50 ° C
Night mode setting (18:00-06:00)
Drive mode:

3×AAA battery (not included)
USB charging cable (included)
2 USB ports to charge your phone
Product size: about 14.5*14.5*10.5cm
When using the battery or powering through the USB cable, the BI sound will be heard when the LED is lit.
When using the battery, the LED will light for 5 seconds by touching any button.
When connected with a USB cable, the LED will remain lit.

2. Function button

a. Touch the MODE button to switch: time – gt, temperature – gt, alarm clock – gt, night mode ON/OFF

b. Touch the UP button to switch the 3-lamp brightness adjustment

c. In time mode, touch DOWN to turn the alarm function on/off.

e. Touch the finger button to select any of the RGB lights (red, orange, green, blue, sky blue, purple, white, switch 7 lights, turn off the RGB lights). RGB lights can only be used with USB cable drivers.

3. operating

1) Time setting

1 In time mode, press and hold MODE to set the time, the order is 12 hours / 24 hours – gt, hours – gt, points

2 The setting item will flash during the setting process

3 Touch the UP button once to add 1 and press the UP button long to increase the speed by 8 steps.

4 Touch the DOWN button to decrease 1, press and hold the DOWN button, and decrease by 8 steps.

5 If the 12-hour system is selected, the PM display indicates the afternoon time. No display means AM time (AM time does not reflect AM)

Touch MODE or no operation for 10 seconds, confirm the setting and return to normal mode.

2) Alarm setting

1 In time mode, touch MODE three times to enter the time setting mode. Press and hold MODE, AL icon and hour flash, enter alarm time setting, the order is hour – gt, minute – gt, snooze time (5 points to 60 minutes)

2 Touch the UP button once to add 1 and press the UP button long to increase the speed by 8 steps.

3 Touch the DOWN button to decrease 1, press and hold the DOWN button, and decrease by 8 steps.

4 The AL icon will flash during the setup process.

5 Touch MODE or no operation for 10 seconds to confirm the setting and return to normal mode.

6 When the alarm sounds, press any button to stop the alarm

3) When the alarm occurs

1 BIBIBIBI alarm 2 minutes

2 Touch MODE to stop the alarm, turn on the snooze function, AL icon flashes until the next alarm time

3 Touch UP and DOWN to turn off the alarm. If the AL icon stops flashing, turn off the alarm time.

4 When the alarm occurs, the RGB lights will flash together.

4) Snooze

1 default snooze time is 5 minutes

2 In the alarm mode, press and hold MODE to enter the alarm setting, and touch MODE three times to enter the snooze time setting. 05 flashes, touch UP or DOWN to set snooze time from 5 minutes to 60 minutes

3 Touch the UP button once to add 1 and press the UP button long to increase the speed by 8 steps.

4 Touch the DOWN button to decrease 1, press and hold the DOWN button, and decrease by 8 steps.

5 When the alarm is activated, touch MODE to stop the alarm and turn on snooze. AL flashes until the next alarm time expires.

6 When using battery power, touch any button, the LED light is on for 5 seconds

5) Night mode

1 Night mode: LED lights will automatically dim at night time

2 In the time interface, touch the MODE button 4 times to enter the night mode. Touch the UP or DOWN button to switch the night mode. ON means to turn on night mode, and OFF means to turn off night mode.

3 The default night mode time is 18:00-6:00

4 When the night mode is ON, press and hold MODE to enter the night mode setting. The setting sequence is: night time start hour – gt, night time start minute – gt, night time end hour – gt, night time end minute. When setting night time start time, mirror The upper circle is lit, and when the night time end time is set, the lower circle of the mirror is lit.

6) Brightness adjustment

3 brightness adjustment, default bright, touch UP to switch bright, mid, dark

7) Temperature display

1 In time mode, touch MODE to display the temperature. Touch UP to switch temperature °C/°F

2 In temperature mode, press and hold MODE until BI sounds. LED switching display: temperature (5 seconds) – gt, time (10 seconds)
Long press MODE to hear BI sound again, return time interface

Leave a Comment