Price:
US$11.19

Free Shipping


Overview and Specifications:

This heater has a power of 900 watts and an average of two hours or so. It is suitable for rooms with less than 20 square meters. The effect is very good. It can be used by ordinary household sockets. It is energy-saving and durable. It is equipped with an overheat protector to prevent fires. This is Other imitations are not available. good results

Turn on the side self-locking switch to turn on the power, and turn on the fan to turn,

Temperature adjustment: Press the “+” or “-” button to increase or decrease the set temperature in the temperature display state. The default temperature is 20 ° C, the range is 15-32 ° C,

Wind speed adjustment: press the “MENU” button until the screen flashes “HH” or “LL”, press the “+” button to switch to “HH” (fast gear), press the “-” button to switch to “LL” (slow), When the fan is stopped, adjusting the temperature will cause the fan to operate for 15 seconds.

Timing setting: Press the “MENU” button until the screen flashes “00” or other time has been set, then press the “+” or “-” button to increase or decrease the setting time. The timing range is 1-12 hours. If it is not set, the default is 12 hours. “00” means no timing.

Note: “–” is displayed after the time has elapsed, and it enters the standby state. Press any key on the main unit or power on the remote control to restart.

After the room temperature reaches the set temperature, the heating is stopped first, and the fan stops working after 1 minute, when it is lower than the set temperature by 1 degree, it is reheated,

After the time has elapsed, the heating is turned off, and after the fan continues to work for 1 minute, the fan is turned off,

Remote control instructions:

Temperature adjustment: Press the “+” or “-” button to increase or decrease the set temperature.

Wind speed adjustment: press the “Speed” button to switch between “HH” (fast gear) and to “LL” (slow gear),

Timing setting: Keep pressing the “Timer” button until the desired setting time is displayed,

Standby/Power On: When the self-locking switch on the main unit is turned on, press “Power” to standby or power on,

Leave a Comment